PoE Switch · By Port Count
Compact PoE switches with 4 PoE ports (plus uplinks) for small camera groups, retail counters, lifts and single-room installations — desktop or wall-mount, with built-in power supplies.
Compact PoE switches with 4 PoE ports (plus uplinks) for small camera groups, retail counters, lifts and single-room installations — desktop or wall-mount, with built-in power supplies.
Small does not mean stripped down: this class keeps the surveillance features of the bigger lines — 250-metre long-distance mode, VLAN isolation and the PoE watchdog — because a four-camera shop has the same frozen-camera problems as a forty-camera warehouse. Models here are 10/100M or gigabit, smart (plug-and-play with function switches) or lightly managed.
Models in the 4-PoE-port class from the official catalogue (official product names).
| Model | Official product name |
|---|---|
| ONV-H1064PLD | 10/100M 6-port smart PoE switch |
| ONV-POE31004PLD | 10/100M 5-port smart PoE Switch |
| ONV-POE33032PL | Gigabit 3-port PoE switch |
| ONV-POE33006PFM | Gigabit 6-port L2+ managed PoE switch |
| ONV-H3064P | Gigabit 6-port PoE switch |
| ONV-H3064PS | Gigabit 6-port PoE switch |
| ONV-H53054PFDM | Gigabit 6-port Easy managed PoE switch |
| ONV-H53064PFDM | Gigabit 7-port Easy managed PoE switch |
| ONV-H3054PFD-1BT | Gigabit 6-port PoE switch |
| ONV-H3064PFD-1BT | Gigabit 7-port PoE switch |
The ONV-H1064PLD is the reference model of this class: 4 PoE ports at 30W each, 2 uplink ports, a 65W built-in supply, and the E/D function switches for 250-metre transmission and the PoE watchdog.
| Parameter | Datasheet value |
|---|---|
| PoE ports | Port 1–4, IEEE 802.3 af/at |
| Uplink ports | 2 × 10/100Base-TX RJ45 |
| Max power per port | 30W |
| Total PoE power | 65W (built-in PSU, AC100–240V) |
| Switching capacity | 1.6 Gbps (non-blocking) |
| Forwarding rate | 0.89 Mpps @64byte |
| Long-distance mode | 10M / 250 meters transmission (function switch E) |
| PoE watchdog | Function switch D: auto-restarts a failed powered device |
| Dimensions | 142.5 × 115 × 40 mm |
| Operating temperature | -20°C to +55°C |
| Certification (datasheet) | CE mark, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS |
The 4-PoE-port class is sized by a simple rule: count the powered devices on the segment, then leave at least two spare ports. Power matters as much as ports — add up the draw of every camera, access point or phone and compare it with the total PoE budget in the datasheet, not the headline per-port figure. Where the segment also carries uplinks to another switch or an NVR, prefer the models with dedicated gigabit or SFP uplinks so camera traffic never competes with the uplink.
Typical deployments for this class are detailed in the CCTV and IP camera solution pages; the same hardware also powers wireless access points, IP phones and access-control readers on the same segments.
Four powered devices on the PoE ports, with the uplink ports free for the NVR or router. If any camera sits beyond 100 metres of cable, enable the long-distance mode (10M/250 m) on its port or step up to the long-distance models.
For fixed cameras drawing 5–12W each, comfortably. The per-port ceiling is 30W (802.3at), which also covers most PTZ and IR cameras; check the total budget — 65W on the featured model — against the sum of your devices.
Send your port count, per-port power and uplink requirements — we reply with the exact models, datasheets and a quotation. MOQ and lead time are confirmed per model and order scope in the quotation.
Which control level your project needs.
How to size watts per port and per switch.
