PoE Switch · By Port Count
Poe Switch 8 Port: the 8-PoE-port class
The 8-PoE-port class is the workhorse of small surveillance: eight camera or access-point ports plus uplinks, in desktop and wall-mount bodies with built-in supplies from 120W.
PoE Switch · By Port Count
The 8-PoE-port class is the workhorse of small surveillance: eight camera or access-point ports plus uplinks, in desktop and wall-mount bodies with built-in supplies from 120W.
The 8-PoE-port class is the workhorse of small surveillance: eight camera or access-point ports plus uplinks, in desktop and wall-mount bodies with built-in supplies from 120W.
Buyers land in this class from two directions — a small site that has outgrown a 4-port unit, and a larger design that uses several 8-port switches as edge nodes under a managed core. Gigabit and 10/100M versions sit side by side in the catalogue; for camera-only segments the 10/100M smart models keep costs down, while gigabit versions suit mixed camera and data traffic.
Models in the 8-PoE-port class from the official catalogue (official product names).
| Model | Official product name |
|---|---|
| ONV-H3108P | Gigabit 10-port PoE switch |
| ONV-H3108PS | Gigabit 10-port PoE switch |
| ONV-POE33108PFG | Gigabit 10-port PoE switch |
| ONV-POE31008PLD | 10/100M 9-port smart PoE switch |
| ONV-H53108PFDM | Gigabit 11-port Easy managed PoE switch |
| ONV-H3108PFD-2BT | Gigabit 11-port PoE switch |
| ONV-POE57008PFB | 2.5G 9-port PoE switch |
| ONV-H1108PGS | Gigabit uplink 10-port smart PoE switch |
| ONV-H1108PS | 10/100M 10-port smart PoE switch |
| ONV-H53108PFMA | Gigabit 10-port Easy managed PoE switch |
The ONV-H1108PLD doubles the compact class: 8 PoE ports, 120W total budget, 2 uplink ports and the same E/D function switches — the datasheet values are listed in full.
| Parameter | Datasheet value |
|---|---|
| PoE ports | Port 1–8, IEEE 802.3 af/at |
| Uplink ports | 2 × 10/100Base-TX RJ45 |
| Max power per port | 30W |
| Total PoE power | 120W (built-in PSU, AC100–240V) |
| Switching capacity | 2 Gbps (non-blocking) |
| Forwarding rate | 1.488 Mpps @64byte |
| MAC address table | 2K |
| Long-distance mode | 10M / 250 meters transmission (function switch E) |
| PoE watchdog | Function switch D |
| Dimensions | 195 × 130 × 40 mm |
The 8-PoE-port class is sized by a simple rule: count the powered devices on the segment, then leave at least two spare ports. Power matters as much as ports — add up the draw of every camera, access point or phone and compare it with the total PoE budget in the datasheet, not the headline per-port figure. Where the segment also carries uplinks to another switch or an NVR, prefer the models with dedicated gigabit or SFP uplinks so camera traffic never competes with the uplink.
Typical deployments for this class are detailed in the CCTV and IP camera solution pages; the same hardware also powers wireless access points, IP phones and access-control readers on the same segments.
Cameras alone rarely saturate 10/100M access ports, but the uplink matters: several HD streams aggregate quickly. Choose gigabit models when the same switch also carries office data or high-bitrate cameras, or when the uplink feeds another switch.
Yes — 802.3af/at ports power any compliant device. Keep the total under the switch's budget (120W on the featured model) and reserve headroom for IR heaters and PTZ motors, which draw more at night or in motion.
Send your port count, per-port power and uplink requirements — we reply with the exact models, datasheets and a quotation. MOQ and lead time are confirmed per model and order scope in the quotation.
Which control level your project needs.
How to size watts per port and per switch.